|
|
|
|
Adjustment Instructions:a) Ensure that the rifle is unloaded! b) First increase engagement by turning the "Sear Engagement" screw counter-clockwise 1 turn. Then, with the bolt closed and action cocked, turn it slowly clockwise until the action fires. From that point turn the screw counter-clockwise 1/4 turn at higher weights, and 1/2 turn at lower weights. c) Increase weight of pull by turning the "Weight Adjustment" screw clockwise, reduce by turning counter-clockwise. d) Reduce overtravel by turning the "Overtravel" screw clockwise. e) Reduce first pressure length or select single pressure by turning the "First Pressure Length" clockwise. f) Increase first pressure weight by turning "First Pressure Weight" screw clockwise.
Trigger Blade Position:
a) Ensure that the rifle is unloaded! b) To change position of the Trigger, turn "First Pressure Length" and "First Pressure Weight" counter-clockwise sufficently to remove "Trigger Pin". Move blade to new hole, replace pin, and re-adjust the "First Pressure Length" and "First Pressure Weight" as desired.
|
|
Send mail to Webmaster
with questions or comments about this web site. Join the NRA! |
